Panasonic KX-FP200 Operating Instructions Manual

Also see for KX-FP195: Operating instructions Operating instructions Operating instructions

Contents

1 2 34 5 67 8 9038Receiving using an extension phone1 Press (MENU).Display:2 Press K, then D A.3 Press (START/COPY/SET).4 Press or to select the desired setting.¡If this feature is not required, select “OFF”.5 Press (START/COPY/SET).6 Enter the new code number.7 Press (START/COPY/SET).8 Press (MENU).CODE=U9MODE=ON [Ÿÿ]REMOTE FAX ACT.SYSTEM SET UPRemote fax receiving(using an extension phone to receive a fax message)If you have an extension phone connected to your facsimile unit or on the same line, it is possible to receive amanual fax message. Using the extension phone, dial the remote fax activation code.This saves you from going to the facsimile unit and pressing (START/COPY/SET).Important:¡To activate this feature, use a touch tone telephone as the extension phone and enter the remote faxactivation code FIRMLY.¡The remote fax activation code is set to “U9” as a pre-selected setting.1 When a call is received, lift the handset of theextension phone.2 When:—document reception is required,—a slow beep is heard, or—no sound is heard,enter the remote fax activation code FIRMLY.3 Hang up the handset.¡The facsimile unit is activated for reception.Changing the remote fax activation codeThis code can be from 2 to 4 digits in length using numbers 0 through 9, and the character *.Note:¡Some special telephone company serviceswill require you to press a service accesscode. If you subscribe to such services, all orpart of the remote fax activation code mustbe different from the service access code.¡If the remote fax activation code is set to“0000”, this feature will not work properly.To EXT jack orthe same lineExtension phone(MENU)(START/COPY/SET)Dial keypadSpecial receiving features