Panasonic KX-FP205 Operating Instructions Manual

Also see for KX-FP205: Instruction manual Operating instructions

Contents

7. Programmable Features41Setting the memoryreception alert{#}{4}{4} To alert you with a beeping sound when a received fax documentis stored into memory due to some existing problem.{0} “OFF”: Deactivates this feature.{1} “ON” (default): You will hear a beeping sound.Note:L The slow beeps will continue until you clear the printingproblem and make sure the unit is supplied with enough paperto print the stored document.Setting friendlyreception{#}{4}{6} To receive a fax automatically when you answer a call and hear afax calling tone (slow beep).{0} “OFF”: You have to press {FAX START} for fax reception.{1} “ON” (default): You do not have to press {FAX START} for faxreception.Setting the voiceguidance (KX-FP215only){#}{4}{7} If you wish to hear voice guidance, activate this feature.{0} “OFF”: Deactivates this feature.{1} “ON” (default): You will hear the friendly reception voice guide,pre-recorded messages and voice time/day stamp.Setting the autodisconnection{#}{4}{9} To answer a call with an extension telephone in TEL/FAX mode(page 27) or TAM/FAX mode (page 28), activate this feature andprogram the code.{0} “OFF”{1} “ON” (default)1. {MENU} i {#}{4}{9}2. Press {1} to select “ON”. i {SET}3. Enter your code from 2 to 4 digits, using 0–9 and {*}.L The default code is “;0”.4. {SET} i {MENU}Changing the recordingtime for your TAM/FAXgreeting message (KX-FP215 only){#}{5}{4} {1} “16s” (default): Maximum recording time is 16 seconds.{2} “60s”: Maximum recording time is 60 seconds.See page 33 for details.Setting the scancontrast{#}{5}{8} To send or copy a document with faint or dark writing, set thisfeature before transmission or copying.{1} “NORMAL” (default): Used for normal writing.{2} “LIGHT”: Used for dark writing.{3} “DARKER”: Used for faint writing.Setting the incomingmessage monitor (KX-FP215 only){#}{6}{7} To hear an incoming message (ICM) from the speaker when theanswering machine is recording the message.{0} “OFF”{1} “ON” (default)Setting the ErrorCorrection Mode (ECM){#}{6}{8} This feature is available when the transmitting/receiving faxmachines are ECM compatible.{0} “OFF”: Deactivates this feature.{1} “ON” (default): If there is an error during faxtransmission/reception, the fax machine will support thecommunication.Note:L You cannot change the setting when received documents arein memory.Feature Feature code Selection