27Sending Faxes600 mm(235⁄ 8")Paper widthMinimum size128 mm(5")128 mm(5")Maximum size216 mm(81⁄2")208 mm (83⁄16" )Effective scanning area4 mmScannedarea216 mm (81⁄2")Note:l Remove clips, staples or other similar fastening objects.l Check that ink, paste or correction fluid has dried.l Do not send the following types of documents. Use copies for fax transmission.— Chemically treated paper such as carbon or carbonless duplicating paper— Electrostatically charged paper— Heavily curled, creased or torn paper— Paper with a coated surface— Paper with a faint image— Paper with printing on the opposite side that can be seen through the front (e.g. newspaper)Documents you can sendDocument weightSingle sheet:45 g/m 2 to 90 g/m2(12 lb. to 24 lb.)Multiple sheets:60 g/m 2 to 75 g/m2(16 lb. to 20 lb.)Convenient way to send a faxYou can dial the fax number first before insertingthe document. This is convenient if the otherparty’s number is indicated on the document.1. Enter the fax number.l The handset must be on the cradle.2. Insert the document.3. Press .If your unit does not send a fax using theJOG DIAL directoryl Confirm the stored items on the display (p. 24)or on the telephone number list (p. 68).l Check that the number dialed is answered bythe other party’s machine.1. Rotate until the desired name isdisplayed.2. Press .l The connecting tone will be heard during dialingto tell you the status of the other party’s machine(feature #76 on page 53).MONITORJOG DIALFAX STARTTo transmit more than 10 pages at a timeInsert the first 10 pages of the document. Add theextra pages (up to 10) before the last page is fedinto the unit.To stop transmissionPress .To redial the last numberPress .l If the line is busy, the unit will automaticallyredial the number up to 2 times.l During redial, the following will be displayed.Display:l To cancel redialing, press .Fax auto redial for the JOG DIAL directoryIf the line is busy or there is no answer whenusing the JOG DIAL directory, the unit willautomatically redial the number up to 2 times.l This feature is also available for delayedtransmission (feature #25 on page 50).l During redial, the following will be displayed.Display:l To cancel redialing, press .STOPWAITING REDIALSTOPWAITING REDIALREDIAL/PAUSESTOP