38Receiving Faxes1 When the unit rings, lift the handset toanswer the call.2 When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press .3 Replace the handset.l The unit will start fax reception.CONNECTING.....FAX STARTHandsetSTOPAUTO ANSWERFAX STARTDisplayTo stop receivingPress .Friendly reception featureWhen you answer a call and hear a fax callingtone (slow beep), the unit will automatically startfax reception.l If this feature is not required, set feature #46 to“OFF” (p. 52).STOPTEL mode!(answering all calls manually)If the arrow (t) is shown on the right of thedisplay, turn it off by pressing .Display:ONTEL MODEAUTO ANSWERNote:l If you do not answer the call within 15 rings, the unitwill temporarily switch to the fax and the caller cansend a document.l Up to 30 sheets of printed paper can be held. Removethe printed paper before it exceeds 30 sheets.Fax reception in memoryWhen a printing problem is detected, the unit willtemporarily store the received document intomemory.While the document is in memory;— the display will show an error message and thefollowing message alternately.Display:— slow beeps will sound (memory reception alert).See feature #44 on page 52.l Follow the instructions on pages 55 and 56 tosolve the problem.l For memory capacity, see page 73.FAX IN MEMORYActivating the TEL modeReceiving a fax manually