Panasonic KX-HDV230NE Operating Instructions Manual

Also see for KX-HDV230: Quick start guide Guide Operating instructions Manual Administrator's guide

Panasonic KX-HDV230NE Operating Instructions Manual Manual pdf 32 page image

Holding in a System Parking Zone (Call Park)You can use this feature as a transferring feature.When Call Park is permitted, thePark soft key is displayed. However, the Call Park feature numbermust be set beforehand. Also, depending on your phone system, you may need to enter a parking zonenumber to retrieve a parked call. The feature depends on your phone system. Contact your administratorfor further information.To set1. PressPark during a conversation.To retrieve (Call Park Retrieve)[In standby mode]1. Enter the Call Park Retrieve feature number.2. Go off-hook.NoteR Depending on the telephone system, thePark soft key might blink to show that the line has a parkedcall. In this case, you can retrieve the call by pressing the blinkingPark soft key. However, to retrievea parked call using the soft key, the Call Park Retrieve feature number must be set beforehand.Contact your administrator for further information.Talking to Two Parties Alternately (Call Splitting)When talking to one party while the other party is on hold, you can swap the calls back and forth(alternately).To alternate between the parties leaving one party on hold temporarily1. Press /[HOLD] during a conversation.2. Dial the other party’s extension number.3. After talking to the other party, pressLine .4. [D]/[C]: Select the original party. aOK5. Talk to the party.Three-party ConferenceDuring a conversation, you can add an additional party to your call and establish a conference call.NoteR Your phone system may support advanced conference features, such as conference calls with four ormore parties. In this case, the procedures for handling a conference call may be different from thoseexplained in this section. For details, contact your phone system dealer/service provider.Making a Conference Call1. Press /[CONF] during a conversation.2. Dial the party you want to add to the conversation. aCall3. /[CONF]Removing a Party from the ConferenceDuring a conference, you can remove other parties from the conference. However, this operation isavailable only during conference calls you initiate.1. During a conference call, press /[HOLD].32During a Conversation