2. Press /[HOLD] again to show the conference parties on hold.3. [D]/[C]: Select the party to remove. aOK4. Talk to the party and go on-hook to end the call.5. Go off-hook and talk to the remaining party.Ending a Conference CallTo end the conference call, go on-hook.MuteYou can disable the microphone or the handset to consult privately with others in the room while listeningto the other party on the phone through the speaker or the handset.To set/cancel1. /[MUTE/AUTO ANS]NoteR When the icon is blinking on the LCD, Mute is on.R During Mute, even if you switch from/to speakerphone, Mute will continue.R During Mute, even if you connect/disconnect a headset, Mute will continue.Call WaitingDuring a conversation, if a second call arrives, you will hear a call waiting tone. You can answer thesecond call by disconnecting or holding the current call.This is an optional telephone company service. You can receive a call waiting tone and the caller’sinformation. For details, contact your phone system dealer/service provider.To disconnect the current call and then talk to the new party1. Go on-hook.2. Go off-hook.To hold the current call and then talk to the new party1.AnswerNoteR You can also answer the call by pressing /[HOLD].Off-hook MonitorDuring a two-party conversation with the corded handset, you can allow other people to listen to theconversation through the speaker while you continue the conversation using the corded handset.To start/To cancel1. Press /[SP-PHONE] during a conversation.NoteR When off-hook monitor is active, replacing the corded handset to its cradle enables hands-free mode.33During a Conversation