R Simultaneous Ring*1Enables parallel ringing. Up to 10 locations can be specified to ring simultaneously when you receive acall.Status MeaningColor Light patternBlue On Simultaneous Ring feature: OnOff Simultaneous Ring feature: OffR Hoteling/Hospitality*1Used to log in/log out of the Call Center Hoteling Event.R TransferUsed to transfer a call to the extension assigned to the key with confirmation during a conversation.R Blind Transfer*1Used to transfer a call to the extension assigned to the key without confirmation during a conversation.R ConferenceUsed to establish a multiple-party conversation (conference).R Directed Call Pickup*1Used to answer an incoming call arriving at the specified telephone number.R Call Park/Park Retrieve*1Used to park a call or to retrieve a parked call (Call Parking).*1 This item can be used only when the feature is enabled. Contact your administrator for furtherinformation.*2 This item can be selected when the list is registered on the telephone. Contact your administrator forfurther information.Block anonymous callsThis feature allows the unit to reject calls when the unit receives a call without phone number. The defaultsetting is "Off".IMPORTANTR A password may be required for these settings. We recommend setting with your administrator.Contact your administrator for further information.R This feature is not available on shared lines.[In standby mode]1. Tap / a "Advanced Settings"2. Tap / a "Call Settings"3. Tap / a "Block Anonymous"4. Tap / : Select a desired line.5. Select "On" or "Off". a "OK"Incoming call barring (Caller ID service users only)This feature allows the unit to reject calls from specified phone numbers that you do not want to answersuch as junk calls.When a call is received, the unit does not ring while the caller is being identified. If the phone numbermatches an entry in the call barred list, the unit rejects the call.53Customizing the Telephone