Default Value Not stored.Configuration File Reference CONFERENCE_SERVER_URIFirst-digit TimeoutDescription Specifies the length of time, in seconds, within which the first digits ofa dial number must be dialed.Value Range 1–600 (s)Default Value 30Configuration File Reference FIRSTDIGIT_TIMInter-digit TimeoutDescription Specifies the length of time, in seconds, within which subsequentdigits of a dial number must be dialed.Value Range 1–15 (s)Default Value 5Configuration File Reference INTDIGIT_TIMTimer for Dial PlanDescription Specifies the length of time, in seconds, that the unit waits when a "T"or "t" has been entered in the dial plan.Value Range 1–15 (s)Default Value 5Configuration File Reference MACRODIGIT_TIMEnable # Key as delimiterDescription Selects whether the # key is treated as a regular dialed digit or adelimiter, when dialed as or after the second digit.Value Range • Yes: # is treated as the end of dialing delimiter.• No: # is treated as a regular dialed digit.Default Value YesConfiguration File Reference POUND_KEY_DELIMITER_ENABLEInternational Call PrefixDescription Specifies the number to be shown in the place of the first "+" symbolwhen the phone number for incoming international calls contains "+".Value Range Max. 8 characters (consisting of 0–9, *, and #)Default Value Not stored.Configuration File Reference INTERNATIONAL_ACCESS_CODE4.6.1 Call ControlDocument Version 2016-05 Administrator Guide 119
