2.7.2 Adjusting the VolumeAdjusting the Receiver/Speaker/Headset Volume1. Press the [ ] or [ ] volume key to adjust the volume during a conversation.Note• Both receiver volume and headset volume are adjusted in training mode. See "3.4.9 Using TrainingMode ".Adjusting the Ringer Volume or Turning the Ringer Off1. In standby mode, press the [ ] or [ ] volume key to adjust the ringer volume.2. Tap "OK".Adjusting the Ringer Volume or Turning the Ringer Off while RingingWhile receiving a call, do the following to adjust the ringer volume or turn the ringer off.Note• If you attach a headset while receiving an incoming call, ringing will be heard from the speaker.To adjust the ringer volume1. Press the [ ] or [ ] volume key to adjust the ringer volume.Note• The adjusted volume level will also be used for subsequent calls.• The volume can also be adjusted in the pop-up window.To turn the ringer off1. Tap .2.7.3 Entering CharactersYou can enter characters and digits using the dialing keys.You can select one of the character modes by tapping the desired character mode while entering a name.To change the character mode while editing a name in the phonebook, tap the desired character mode.For available characters, see “5.1 Character Mode Table".Suffix: [none] / C Suffix: NE / X / SX Suffix: RUABC(Latin)0 - 9(Numeric)(Extended 1)ABC(Latin)0 - 9(Numeric)(Greek)(Extended 1)(Extended 2)(Cyrillic)0 - 9(Numeric)ABC(Latin)(Extended 1)(Extended 2)● Example: To enter "Anne" in Latin Mode• To switch between uppercase and lowercase, press .2.7.2 Adjusting the Volume52 Operating Instructions Document Version: 2017-08
