3.1 Making CallsThis section explains the basic methods for making a call.• You can confirm that the number was dialed correctly before calling (Predialing) by entering the number,then going off-hook.• To cancel dialing, press / CANCEL .• To insert a 3 second pause between phone numbers, tap "Pause".*1It is useful when you want to operate voice mail service without listening to pre-recorded announcement,for example. Repeat as needed to create longer pauses.• The "+" symbol (international dialing code) can be entered by pressing and holding the key.• You can select whether to make a voice call or a video call. If you make a call by going off-hook, the typeof call that is established depends on the "Call Mode" setting (KX-HDV430 only).*1 This icon is displayed only when configured on the telephone. Contact your administrator for further information.3.1.1 Basic CallingCalling by Dialing1. In standby mode, go off-hook.2. Dial the outside party’s number.3. Do one of the following:a. Tap "Voice Call" to make a voice call.b. Tap "Video Call" to make a video call (KX-HDV430 only).4. Go on-hook to end the call.Note• You can use a specific line by pressing a function key assigned to a line (see "4.4.3 The Types ofFunction Keys") or by using the Line Status screen (see "3.8 Checking the Line Status").• To dial a new number without going on-hook, follow the procedure below.1. During a conversation, press / MENU .2. Tap "Flash/Recall".PredialingIn standby mode, you can start dialing while still on-hook. After dialing the number, go off-hook to begin thecall.1. In standby mode, dial while still on-hook.2. Do one of the following:a. Go off-hook.*1b. Tap "Voice Call" to make a voice call.c. Tap "Video Call" to make a video call (KX-HDV430 only).*1 The type of call that is established depends on the "Call Mode" setting (KX-HDV430 only).3.1 Making Calls56 Operating Instructions Document Version: 2017-08
