Panasonic KX-HN3001 Operating Instructions Manual

Also see for KX-HN3001: Manual Operating instructions User manual

ConnectionsInsert the AC adaptor plug firmly into theDC jack.Connect the AC adaptor to the poweroutlet.Note:R Use only the supplied AC adaptorS006AKU0500100.21Note about power connectionsAC adaptor connectionR The AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.)R The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weight ofthe adaptor may cause it to becomedisconnected.Power failureR The camera unit will not work during apower failure.Placing the camera unit on a flatsurfaceThe camera unit can be placed on a flatsurface, however make sure to choose astable location.Wall mountingR Attach the wall mounting adaptor to thecamera unit after making the connections(page 12).R Only use the supplied screw that isattached to the camera base whenattaching the wall mounting adaptor to thecamera unit. Do not use user suppliedscrews. This may cause the camera unit tobecome loose from the wall mountingadaptor.R Mount the camera unit on the stablelocation where the unit can be adequatelysupported when installing.R Use a string or wire to prevent the cameraunit from falling and causing injury if thecamera unit comes off from the wall.R Do not mount the wall mounting adaptor toa ceiling.R Do not mount the camera unit on a softmaterial. It may fall down, break or causeinjury.R Do not mount the camera unit on thefollowing places: plaster board, ALC(autoclaved lightweight cellular concrete),concrete block, plywood less than 25 mm(1 inch) thick, etc.1 Remove the screw and then remove thecamera base from the camera unit.11Supplied screw (page 9)2 Attach the wall mounting adaptor to thecamera unit.12 For assistance, please visit http://shop.panasonic.com/supportGetting Started