Panasonic KX-HN7002 Installation Manual

Also see for KX-HN7001: Installation guide Installation guide

https://panasonic.net/cns/pcc/support/homehawkR iPhone® and iPad® (iOS 10.0 and later) orAndroid™ devices (Android 4.1 and later)(As of October 2017)Note:R The [HomeHawk] app may not functionproperly depending on the systemenvironment, such as the model of yourmobile device, peripherals connected toyour mobile device, and the apps installedon your mobile device.R The following Android devices are notcompatible with the [HomeHawk] app.– Android devices that are not supportedby Google Play™– Android devices with limited hardwarefeatures (Bluetooth, wireless LAN, andmicrophone support are required.)Connections for accesspointNote:R Use only the supplied AC adaptor.1 Insert the AC adaptor DC plug into theDC jack (A), then connect the ACadaptor to the power outlet (1 ).2 Insert the Ethernet cable into the LANjack (B), then connect the Ethernet cableto your router (2 ).3 Insert a microSD card (not supplied) intothe unit’s microSD card slot (C).13221Note about power connectionsAC adaptor connectionR The AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.)R The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weight ofthe adaptor may cause it to becomedisconnected.Power failureR The access point will not work during apower failure.Initial setupConfirm the following before you begin.– Make sure you have installed the[HomeHawk] app on your mobile device– Make sure the access point and yourwireless router are turned on and theaccess point’s LED indicator is blinkingquickly in amber or lit in green– Make sure your access point and mobiledevice are connected to your wireless router– Make sure your mobile device can connectto the Internet24 For assistance, please visit http://shop.panasonic.com/supportSetup