Panasonic KX-HN7002 Installation Manual

Also see for KX-HN7001: Installation guide Installation guide

5 Mount the wall mounting adaptor to thewall. Next, attach the safety wire to thewall, and then attach the camera to thewall mounting adaptor.1Wall mounting screws225.4 mm (1 inch)3HoleYou can prevent the camera from fallingby passing a string through the hole in thewall mounting adaptor.3123 216 Adjust the camera angle.Note:R Attach the safety wire while it is bent.R Attach the safety wire high on the wall sothat the camera does not strike anyone inthe event the camera detaches from thewall.R Do not hang from the camera or wallmounting adaptor.Testing the motiondetection rangeAfter you have installed the [HomeHawk] appon your mobile device, you can use yourmobile device to test the performance of thecamera’s motion detection features.For details about these operations, refer to theUser’s Guide (page 32).1 Start the [HomeHawk] app and then tap.2 Tap [Settings].3 Tap [Camera settings] and select thecamera to be tested.4 Tap [Detection] ® [Detection Test].5 Move to an area within the camera’sviewable area.6 While moving near the camera, use yourmobile device to observe where you arein the viewable area when the camera’smotion detection features are triggered.7 Note the areas of the viewable areawhere movement is detected, and makeadjustments as necessary.Note:R You can adjust the area detectable by thevisual sensor. For more information, refer tothe User’s Guide (page 32).Testing the microphoneTo test the microphone, speak loudly andclearly into the microphone while a mobiledevice user is viewing live images from thecamera.30 For assistance, please visit http://shop.panasonic.com/supportSetup