There are 4 basic steps you need to perform in order to access the system from your mobile device.Connections¯Connect your hub to a power outlet and to your telephone line.*1Download¯Download the [Home Network] app to your mobile device.Initial setup¯Use the [Home Network] app to configure the hub to connect to yourwireless router, and then register your mobile device to the hub.Register devices Add more mobile devices (smartphones and tablets), cameras,sensors, and other devices to the system.*1 Refer to the System Setup Guide included with your hub for more information.Download information is available at the web page listed below.{{"www.panasonic.net/pcc/support/tel/homenetwork/"|tolink("http://www.panasonic.net/pcc/support/tel/homenetwork/")}}Requirements– Hub (KX-HNB600)– A wireless router– A compatible mobile deviceCompatible mobile devices– iPhone 4 and later, iPad (iOS 6.0 and later)– Android smartphones and tablets (Android 4.0 and later)– Minimum recommended screen size: 1280´720 (screen content may not be displayed properly ondevices with smaller screens)Note:R The [Home Network] app may not function properly depending on the system environment, such asthe model of your mobile device, the peripherals connected to your mobile device, and the appsinstalled on your mobile device.R The following Android devices are not compatible with the [Home Network] app.– Android devices that are not supported by Google Play– Android devices with limited hardware features(Bluetooth, Wi-Fi, and microphone support are required.)In order to use your mobile device to access the system, you must first configure the hub to access yourwireless router.Note:R If your hub is already configured to access your wireless router, you do not need to perform thisprocedure again.R If you have completed this procedure and want to register another mobile device to the hub, see“Registering other mobile devices to the hub”, Page 28.R If you experience trouble while performing this procedure, refer to the information in “Sometimes Icannot access the system while at home”, Page 110.25System setup