5 To erase all recordingsTap [Delete All].To erase selected recordingsTap [Delete Selected Contents], and then select the dates or recordings that you want to erase.6 Tap [OK].Note:R You can also erase a recording during playback by tapping ® [OK].Temperature alert (indoor cameras only)You can configure the camera to send notifications if the camera’s ambient temperature is too cold or toohot.1 From the [Home Network] app home screen, tap [Settings].2 Tap [Device Profiles].3 Tap [Camera].4 Select the device that you want to change settings for.5 Tap [Temperature Sensor].6 Slide the [Temperature Sensor] switch to select whether or not the system notifies you if thecamera’s ambient temperature is above or below the specified temperature.7 Slide the [Units] switch to select whether the temperature is displayed and specified in Fahrenheit orCelsius.8 Tap the upper threshold of the acceptable temperature range, select the desired temperature, andthen tap [OK].9 Repeat the previous step for the lower threshold of the acceptable temperature range.Note:R You can also change these settings while viewing live camera images by opening the options menuand selecting [Indoor Camera Settings].Confirming temperature alert historyYou can view a log of previous temperature alert detections.1 From the [Home Network] app home screen, tap [Camera].2 Tap the camera image of the desired camera.3 Open the options menu (see “Displaying the options menu”, Page 35).4 Tap [Alert Log].Sound alert (indoor cameras only)You can configure the camera to send notifications if the camera’s microphone detects sound.1 From the [Home Network] app home screen, tap [Settings].2 Tap [Device Profiles].3 Tap [Camera].62Using the app
