Panasonic KX-HNC200 Installation Manual

Also see for KX-HNC200: Quick setup User guide Installation guide Installation guide

Contents

Panasonic KX-HNC200 Installation Manual Manual pdf 12 page image

Testing the motiondetection rangeAfter you have installed the [Home Network]app on your mobile device, you can use yourmobile device to test the performance of thecamera’s motion detection feature. For moreinformation, refer to the User’s Guide(page 13).1 Start the [Home Network] app anddisplay live images from the camera.2 Move to an area within the camera’sviewable area.3 While moving near the camera, use yourmobile device to observe where you arein the viewable area when the camera’smotion detection feature is triggered.R When the motion detection feature istriggered, the camera’s LED indicatorlights in red for about 3 seconds.4 Note the areas of the viewable areawhere movement is detected, and makeadjustments as necessary.Note:R You can adjust the area detectable by thevisual sensor. For more information, refer tothe User’s Guide (page 13).Testing the microphoneTo test the microphone, speak loudly andclearly into the microphone while a mobiledevice user is viewing live images from thecamera.Features available whenusing the [Home Network]appSome of the features that are available whenusing the [Home Network] app are listedbelow. For more information, refer to theUser’s Guide (page 13).– Alarm systemYou can use the app to arm and disarm thealarm system, confirm the current status ofthe sensor, and view a log of previousevents.– Live camera monitoringYou can view live images from the camera,even while away from home.– Listen and talkYou can use your mobile device to talk andlisten to anyone within range of thecamera’s microphone and speaker.– Sensor adjustmentYou can adjust the detection range of thevisual sensor and the setting levels of thesound sensor and temperature sensor.– Sensor integrationYou can configure the camera’s sensorfeatures to trigger other system events,such as camera recording*1, turning on anelectric device (such as a lamp), etc.(Appropriate device required.)*1 A commercially-available microSDcard must be inserted into the hub inorder to record images.– NotificationYou can configure the camera to send anotification to the [Home Network] appwhen the camera’s sensor features aretriggered, for example, when motion isdetected, if a baby is crying (sound sensor)or if the room becomes too warm or toocold (temperature sensor).12 For assistance, please visit http://shop.panasonic.com/supportAppendixHNC200_(en_en)_1005_ver.210.pdf 12 2015/10/06 13:23:03