Panasonic KX-HNC200 Installation Manual

Also see for KX-HNC200: Quick setup User guide Installation guide Installation guide

Contents

Panasonic KX-HNC200 Installation Manual Manual pdf 7 page image

Part names and functionsAIHC ED GFBLens unitMicrophoneStandLED indicatorHoleYou can prevent the camera from fallingby passing a string through the hole in thestand.Temperature sensorSpeakerM NUsed when registering the camera to thehub.DC jackLED indicatorYou can use the LED indicator to confirm thecamera’s status.Indicator StatusOff No power, or LEDindicator is turnedoff*1Green, lit Normal operation*1Green, blinkingslowlyRegistration modeRed Motion detectedRed, blinking slowly Live images arebeing viewed orrecordedIndicator StatusRed, blinking Camera is out ofrange of the hub, ordevice malfunctionAmber, blinkingslowlyCamera is notregistered to a hub*1 You can configure the camera so that itsLED indicator does not light duringnormal operation. For more information,refer to the User’s Guide (page 13).Setup overview1 Initial setupMake sure you can access the systemusing your mobile device. For details,refer to the System Setup Guide includedwith your hub.2 RegistrationRequired only if the camera waspurchased separately (i.e., not as part ofa bundle).3 Confirm the usage areaRead the information in this document toconfirm that the desired usage area issuitable to proper operation.4 ConnectionPlace the camera in the desired locationand connect it to the power outlet.Registering the cameraThis procedure is not required for devicesthat were included as part of a bundle.Before you can use the camera, it must beregistered to the hub.If the camera is not registered to a hub, thecamera’s LED indicator blinks slowly in amber.You can register each device by using theregistration buttons or the [Home Network]app.For assistance, please visit http://shop.panasonic.com/support 7SetupHNC200_(en_en)_1005_ver.210.pdf 7 2015/10/06 13:23:03