Panasonic KX-HNC710 Installation Manual

Also see for HomeHawk KX-HNC710: User guide Installation guides User guide

Contents

SpecificationsR Frequency rangeWireless LAN:2.412 GHz – 2.462 GHz (channels 1 – 11)R RF transmission powerWireless LAN:100 mW (peak transmission power)R Power source5.0 V, 1.0 A*1R Battery performanceOperating time: 7 hoursApprox. 3 months (when used 5 minutes aday)*2R Operating conditions-20 °C – 50 °C (-4 °F – 122 °F)up to 90 % relative air humidity(non-condensing)R Image sensor1.0 megapixel CMOSR Minimum illuminance requiredIR-LED: 0 lx*3White LED: 1 lxR Focal lengthFixed 0.2 m (0.7 feet) – infinityR Angular field of view (camera angle)172°R Motion detection methodPyroelectric infrared sensor (PIR sensor)and visual sensorR PIR sensor detection range (when thesurrounding temperature is approx.25 °C (77 °F))Horizontal: 170°Vertical: 19.1°Detection range: 6 m (19 feet 8 inches)R Visual sensor detection rangeHorizontal: 150°Vertical: 85°R IP ratingIP65*4R Dimensions (height × width × depth)Approx. 98 mm ´ 71 mm ´ 94 mm(3 7/8 inches ´ 2 13/16 inches ´3 11/16 inches)*5R Mass (weight)Approx. 490 g (1.08 lb)*5*1 Only when charging.*2 Battery performance changes dependingon the surrounding temperature,frequency of use, and the actual usageenvironment. For more information, referto the User’s Guide (page 20).*3 The infrared LEDs that surround thecamera lens will illuminate in low-lightconditions.*4 Water resistance is only assured if thecamera is installed correctly according tothe instructions in the Installation Guide,and appropriate water protectionmeasures are taken.*5 Including the wall mounting adaptor.FCC and other informationThis device complies with Part 15 of the FCCRules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmfulinterference, and (2) this device must acceptany interference received, includingFor assistance, please visit http://shop.panasonic.com/support 21Appendix