Panasonic KX-HNH100 Operating Instructions Manual

Also see for KX-HNH100: Quick setup User guide Operating instructions

7 MSAVEN a MOFFNChanging the start and end time1 MMENUN#2372 Continue from step 3, “Turning silentmode on/off”, page 26.Selecting groups to bypass silentmode1 MMENUN#2412 Select your desired groups by pressing1 to 9.R “ ” is displayed next to the selectedgroup numbers.R To cancel a selected group, press thesame dial key again. “ ” disappears.3 MSAVEN a MOFFNCall blockThis feature rejects calls from unwantedcallers (Caller ID subscribers only). Thefollowing items are available when storingphone numbers in the call block list (250 max.).– “Block a single number”: The unitcan reject calls from specific phonenumbers.– “Block range of numbers”: The unitcan reject calls that begin with a numberstored in the call block list, such as atoll-free phone number prefix or certainarea codes.You can also set the unit to reject calls that donot have a phone number.When a call is received, the unit rings briefly*1while caller information is being received. Ifthe caller’s phone number matches an entry inthe call block list, the unit emits no sound tothe caller, and disconnects the call.*1 This is called first ring. If you do not wantthe first ring to sound, turn this setting to“Off” (page 28).Important:R Rejected calls are logged in the caller list.Storing unwanted callersStoring a single phone numberImportant:R We recommend storing 10 digits (includingthe area code). If only 7 digits are stored, allnumbers that have the same last 7 digitswill be blocked.n From the caller list:1 MCN CID2 MbN: Select the entry to be blocked.R To edit the number: MMENUN a MbN:“Edit” a MSELECTNPress MEDITN repeatedly until thephone number is shown in the 10-digitformat. And then, press MSAVEN. Go tostep 5.3 MMENUN4 MbN: “Save CID” a MSELECTN5 MbN: “Call block” a MSELECTN6 MbN: “Yes” a MSELECTN7 Edit the phone number if necessary (24digits max.).8 MSAVEN a MOFFNn By entering phone numbers:1 MMENUN#2172 MbN: “Block a single number” aMSELECTN3 MMENUN a MbN: “Add” a MSELECTN4 Enter the phone number (24 digits max.).R To erase a digit, press MCLEARN.5 MSAVEN a MOFFNStoring a range of numbers1 MMENUN#2172 MbN: “Block range of numbers” aMSELECTN3 MMENUN a MbN: “Add” a MSELECTN4 Enter the desired number (2-8 digits).R To erase a digit, press MCLEARN.5 MSAVEN a MOFFNFor assistance, please visit www.panasonic.com/support 27Programming