Part names andfunctionsABCEFDM NUsed when registering the keypadto the hub.VolumeUsed to adjust the volume of thesounds emitted by the keypad.SpeakerLED indicatorTouchpanelDC jackLED indicatorYou can use the LED indicator toconfirm the keypad’s status.Indicator StatusOff Normal operation or nopower.Red,blinkingslowlyKeypad is notregistered to a hub.Indicator StatusRed,blinkingKeypad is out of rangeof the hub.Red,blinkingquicklyAlarm system wastriggered.Green,blinkingRegistration mode(You pressed and heldM N)TouchpanelThe buttons on the touchpanel allowyou to confirm and change thesystem’s current alarm mode.By default, the button corresponding tothe current alarm mode is lit duringnormal operation and no other buttonsare lit. When you tap the touchpanel,the buttons for all the alarm modes lightfor 10 seconds to allow you to controlthe keypad, then dim again.Button StatusNonedisplayedNo power, or buttonsare turned off*1., lit Normal operation,[Arm: At Home] modeis selected., lit Normal operation,[Arm: Away] mode isselected., lit Normal operation,[Disarm] mode isselected.,blinkingAlarm system wastriggered.For assistance, please visit www.panasonic.com/support 7Setup