Panasonic KX-HNK101 Operating Instructions Manual
Also see for KX-HNK101: User guideOperating instructions
                    | |
Contents |
Button StatusAll buttonslitYou tapped thetouchpanel within thelast 10 seconds. If thebuttons remain lit after10 seconds, thekeypad is notregistered to a hub.All buttonsblinkingRegistration mode(you pressed and heldM N)*1 You can configure the keypad sothat its alarm mode buttons do notlight during normal operation. Formore information refer to theUser’s Guide (page 12).Setup overview1 Initial setupMake sure you can access thesystem using your mobile device.For details, refer to the SystemSetup Guide included with yourhub.2 RegistrationRequired only if the keypad waspurchased separately (i.e., not aspart of a bundle).3 Confirm the installation areaRead the information in thisdocument to confirm that thedesired installation area is suitableto proper operation.4 InstallationInstall the keypad in the desiredlocation.Registering thekeypadThis procedure is not required fordevices that were included as part ofa bundle.Before you can use the keypad, it mustbe registered to the hub.If you purchased devices separately(i.e., not as part of a bundle), you mustregister each device to the hub.You can register each device by usingthe registration buttons or the [HomeNetwork] app.Note:R Before registering the keypad, makesure the AC adaptors of the hub andkeypad are connected and eachdevice is powered.Using registration buttons1 Hub:Press and hold M OTHERDEVICEN until the LED indicatorblinks in green.2 Keypad:Press and hold M N until thebuttons displayed on thetouchpanel start blinking.R When registration is complete,the hub sounds one long beep.Note:R To cancel the registration, pressM N on the hub and on thekeypad.R If registration fails, the hub soundsseveral short beeps.8 For assistance, please visit www.panasonic.com/supportSetup |
Related manuals for Panasonic KX-HNK101
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine