Panasonic KX-HNS104 Installation Manual

Also see for KX-HNS104: User guide Installation guide

Contents

Panasonic KX-HNS104 Installation Manual Manual pdf 14 page image

Testing the glassbreak sensorAfter you have installed the [HomeNetwork] app on your mobile device,you can use your mobile device to testthe glass break sensor. For moreinformation, refer to the User’s Guide(page 14).1 Start the [Home Network], andtap [Settings].2 Tap [Device Registration] andselect [Device Profiles].3 Tap [Glass Break Sensor] andselect [Detection Test].4 Place your mobile device near thesensor and tap [Play].R Your mobile device plays backthe sound of glass breaking.5 Confirm that the sensor’s LEDindicator light in red to indicate thatit has detected the sound ofbreaking glass.6 Tap [OK] when finished.Adjusting the sensorsensitivityYou can use the MHIGHN/MLOWN switch(page 8) to adjust the sensor’ssensitivity.Set it to MLOWN if the sensor frequentlymakes false detections.Features availablewhen using the[Home Network] appSome of the sensor’s features that areavailable when using the [HomeNetwork] app are listed below. Formore information, refer to the User’sGuide (page 14).– Alarm systemYou can use the app to arm anddisarm the alarm system, confirmthe current status of the sensor, andview a log of previous events.– Sensor integrationYou can configure the sensor totrigger other system events, such ascamera recording, turning on anelectric device (such as a lamp), etc.(Appropriate device required.)– Telephone alertYou can configure the system to calla preprogrammed phone numberwhen the sensor is triggered.Accessing the User’sGuideThe User’s Guide is a collection ofonline documentation that helps youget the most out of the [HomeNetwork] app.1 iPhone®/iPad®Tap in the app’s home screen.Android™ devicesTap or press your mobiledevice’s menu button in the app’shome screen.2 Tap [User’s Guide].14 For assistance, please visit www.panasonic.com/supportAppendixHNS104_(en_en)_1120_ver.010.pdf 14 2014/11/19 19:59:10