Screen / Tab Setting item Description Input Type Note1.Port-Analog -Collect CallReject (forBrazil)Mode Enables the PBX toautomatically reject collectcalls. This setting is only forusers in Brazil.RadioWait Time Selects the length of time thatthe PBX waits before sendinga flash signal to reject a collectcall. This setting is only forusers in Brazil.SelectFlashing Time Selects the length of the flashsignal that the PBX sends toreject a collect call. This settingis only for users in Brazil.Select2.4.2 PBX Configuration—[3-2] Trunk—DILDescriptionDIL settings can be programmed for the trunk.Screen / Tab Setting item Description Input Type Note2.DIL Day Specifies the DILdestination in the "Day"mode of time service.SelectLunch Specifies the DILdestination in the "Lunch"mode of time service.SelectNight Specifies the DILdestination in the "Night"mode of time service.Select2.4.3 PBX Configuration—[3-3] Trunk—DDIDescriptionDDI settings can be programmed for the trunk.Screen / Tab Setting item Description Input Type Note3.DDI Dialing Plan - DDI Selects the suitability of aDDI incoming call.SelectDialing Plan -Remove DigitSpecifies the number ofleading digits to beremoved from theincoming called numberfor DDI distribution.SelectDialing Plan -Additional DialSpecifies the number tobe added to the incomingcalled number in the placeof the removed digits forDDI distribution.Dial12.4.2 PBX Configuration—[3-2] Trunk—DIL40 Programming Item List
