3.7 Network Configuration—[8] NAT3.7.1 Network Configuration—[8-1] NAT—NAT SettingsDescriptionThe NAT settings can be programmed.Screen / Tab Setting item Description Input Type Note1.NATSettingsNAT Settings Used to Enable or Disablethe Network AddressTranslation feature.Radio3.7.2 Network Configuration—[8-2] NAT—Virtual ServerDescriptionThe virtual server settings for NAT can be programmed.Screen / Tab Setting item Description Input Type Note2.VirtualServer -VirtualServerAdd Button Clicking this button adds avirtual serverconfiguration.-Application Name Configured ApplicationName for Virtual Serverrule.-Private IP Private IP address ofVirtual Server rule.-Remote IP Remote IP address ofVirtual Server rule.-Private Start Port Private Port startingrange.-Private End Port Private Port ending range.For a single port the startand end are both thesame-Protocol Virtual Server protocol -TCP or UDP or Both i.e.TCP/UDP.-Public Start Port Public Port starting range. -Public End Port Public Port ending range.For a single port the startand end are both thesame-Enable To enable the specifiedentry of the virtual server.-WAN Interface WAN interface on whichthe Virtual Server rule isconfigured.-3.7 Network Configuration—[8] NAT76 Programming Item List
