2.3 Specifications2.3.1 General DescriptionMain CPU 650 MHz Dual CorePower Input 100 V AC to 130 V AC: 0.95 A/200 V AC to 240 V AC: 0.6 A;50 Hz/60 HzPower Consumption (when fullymounted)50 W(240 V: 132 VA, 200 V: 120 VA, 130 V: 104 VA, 100 V: 95 VA)External Backup Battery External battery port is not supported.Support UPS: USB2.0: 1 port (Connector: Type A)Memory Backup Duration 7 yearsDialling Trunk Dial Pulse (DP) 10 pps, 20 ppsTone (DTMF) Dialling with Caller ID (FSK/DTMF)1600 W MaximumExtension Dial Pulse (DP) 10 pps, 20 ppsTone (DTMF) Dialling with Caller ID (FSK/DTMF)SLC1 port supports PFT in combination with the LCOT1 portconnected to an analogue trunk.Mode Conversion DP-DTMF, DTMF-DPRing Frequency 20 Hz/25 Hz (selectable)OperatingEnvironmentTemperature 0 °C to 40 °CHumidity 10 % to 90 % (non-condensing)Conference Call Trunk From 24 ´ 3-party conference call to 9 ´ 8-party conference callMusic on Hold (MOH) 1 port (Level Control: -31.5 dB to +31.5 dB per 0.5 dB)MOH: Selectable Internal/External Music Source portExternal Paging 1 port (Volume Control: -15.5 dB to +15.5 dB per 0.5 dB)Serial Interface Port RS-232C 1 (maximum 115.2 kbps)RJ45 Port MNT Port 1 (for PC connection) 10BASE-T/100BASE-TX/1000BASE-T (Auto MDI/MDI-X)LAN Port 1 (for LAN connection)WAN Port*1 1 (for WAN connection)Extension Connection Cable SLT 1-pair wire (T, R)Air-cooling method FANDimension 430 mm (W) ´ 88 mm (H) ´ 340 mm (D)Weight (when fully mounted) Under 5.1 kg*1 The WAN Port is not used with PCMPR Software Version 001.10000.30 Installation Manual2.3.1 General Description
