4.5.3 SLC2/PRI30 Card (KX-NS0290CE)FunctionA combination card including:• 1 ISDN Primary Rate Interface port (30B channels).• 2 extension ports with Caller ID (FSK) for SLTs.EURO-ISDN/ETSI compliant.LEDsTo NT1/ ExtensionTo SLT LEDsB ARJ45Accessories and User-supplied ItemsAccessories (included): Ferrite core ´ 1, Screws ´ 4User-supplied (not included): RJ45 connector, Twisted pair cableCAUTION• When connecting this optional service card to the trunk, connect through an NT1; do not connect tothe U interface of the trunk directly.• PRI ports are SELV ports and should only be connected to SELV services.Notice• When connecting the RJ45 connector, attach the included ferrite core. Refer to "4.2.8 Attaching aFerrite Core".• The cable to connect to the ISDN Primary Rate Interface port of the SLC2/PRI30 card should beCAT 5 (Category 5) or higher.Note• In some countries/areas, this optional service card must not be connected to the Public SwitchedTelephone Network.• This optional service card can be used for either trunk or extension connection, by setting the A/Bswitch or using the connector with appropriate pin assignments.• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "4.13 Starting theKX-NS1000".Switch SettingsSwitch Type Usage and Status DefinitionA/B Slide Select A (default) for trunk or B for extension use.144 Installation Manual4.5.3 SLC2/PRI30 Card (KX-NS0290CE)
