5.3 Starting Web Maintenance ConsoleSystem RequirementsFor the system requirements of the PC (operating system, hardware specifications, supported browsers, etc.),refer to "1.2.1 Starting Web Maintenance Console" in the PC Programming Manual.Copyright for MD5This software uses the Source Code of RSA Data Security, Inc. described in the RFC1321 (MD5Message-Digest Algorithm).Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved.Licence to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc.MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.Licence is also granted to make and use derivative works provided that such works are identified as "derivedfrom the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing thederived work.RSA Data Security, Inc. makes no representations concerning either the merchantability of this software orthe suitability of this software for any particular purpose. It is provided "as is" without express or implied warrantyof any kind.These notices must be retained in any copies of any part of this documentation and/or software.Password SecurityCAUTIONTo the Administrator or Installer regarding the system password1. Please provide all system passwords to the customer.2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and informthe customer of the importance of the passwords, and the possible dangers if they become known toothers.3. The PBX has default passwords preset. For security, change these passwords the first time that youprogramme the PBX.4. Change the passwords periodically.5. It is strongly recommended that passwords of 10 numbers or characters be used for maximumprotection against unauthorised access. For a list of numbers and characters that can be used in systempasswords, refer to "1.1.3 Entering Characters" in the PC Programming Manual.Connecting to Web Maintenance Console1. Connect the PC to the PBX:• Connect the PBX to a PC with the MNT port and access the PBX directly from the PC. For details, referto "Direct Connection" in "5.2 PC Connection".• Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN or VPN.For details, refer to "Connection via LAN", "Connection via Virtual Private Network (VPN) " and"4.11.1 LAN Connection for the Main Unit".• Connect the PBX to a network with the LAN port and access the PBX from a PC using an Internetconnection. For details, refer to "Connection via Internet" and "4.11.1 LAN Connection for the MainUnit".Installation Manual 2015.3 Starting Web Maintenance Console
