Panasonic KX-P7310 Network Setup Manual

Also see for KX-P7310 - KX-P 7310 B/W Laser Printer: User guide

Step 2: Setting up AppleTalk and TCP/IP onthe computerIf the AppleTalk and TCP/IP of your computer arealready set, proceed to the next step. If they are not set,consult with your network administrator. Regarding theconfiguration of TCP/IP, refer to the help menu ordocumentation for Macintosh.NOTE• Refer to “Network” section in the Operating Instructionsabout setting the AppleTalk and TCP/IP to yourMacintosh.Step 3: Setting up TCP/IP on the printerYou need to set the IP Address, Subnet Mask andDefault Gateway for the printer. It can be set by usingone of the following two methods.• Using the DHCP server• Using the Network Setup ToolNetwork Setup Tool can operate in the Classicenvironment only. When using it in Mac OS X 10.1 orMac OS X10.2, use it in the Classic environment.If the administrator manages the network with DHCPserver, it will automatically assign an IP Address, SubnetMask and Default Gateway. These can be viewed byprinting out the configuration page (see below).You may need to contact your network administrator toset up TCP/IP.1 Turn the printer on.2 Press PRINT/RESET button more than 2 secondsless than 5 seconds.3 Confirm the IP Address and MAC address on theconfiguration page.Step 4: Connecting Your Computer to thePrinterBe sure the printer is connected to the network andturned it on in advance.For Mac OS 8.5 - Mac OS 9.21 Click the Chooser from Apple menu and ensureAppleTalk is Active.NOTE• If necessary, you may need to add the AppleTalk zonewhere your printer is located.2 Click the LaserWriter 8 printer icon.3 Select the printer name from the scroll list.4 Click [Create] or [Setup].The following steps may differ depending on the versionof operating system, follow the instructions on thescreen.5 Select Panasonic KX-P7310 and click [Select].6 Click the option installed in your printer and selectInstalled or total installed memory.7 Click [OK].8 Confirm an icon appeared to the left of the printername selected at step 3.9 Close the Chooser.For Mac OS X 10.1 - Mac OS X 10.2NOTE• Log on the computer as an Administrator.1 Open the Print Center.ï The Print Center is in the Utilities folder(Macintosh HD: Applications:Utilities).2 Select Add Printer... from the Printers menu.3 Select AppleTalk as the connection type, and clickthe printer name.The printer name is displayed in the Printer List.4 Confirm the Printer Model is set to Auto Select...and click Add.5 Close the Print Center.Printed in Japan PJQQB0042ZA S1003B0 M

/ 4

Related manuals for Panasonic KX-P7310 - KX-P 7310 B/W Laser Printer