Panasonic KX-P8415 Maintenance Manual

Settings and Printing Maintenance Specifications 49Error Message Possible CauseOil Roll wearing outOil supply roll is wearing out. Replace the oil supply rollsoon.Corrective ActionClose the left side door.Standard cassette side door isopen.Upper Left side doorOpenInstall a transparency tray.Transparency tray is notinstalled.Transparency TrayNot installedInstall the transparency traywith transparencies in it.Transparency tray is empty.Transparency TrayEmptyError MessagesTransfer wearing outTransfer unit is wearing out. Replace the transfer unit andreset the counter (see "Using thePrinter Panel (Menu Mode)" inSettings and Printing).Install the paper feeder.Paper feederNot installedPaper feeder is not installed.Wait until the printer coolsdown, or use in a cooler place[below 35°C (95°F)].The printer is too hot or roomtemperature is too high to printLabels.Too hot to print LabelRemove Label, Cancel jobPaper TrayEmptyNo media tray is installed ormedia tray is empty.Install a media tray with paperin it.Paper TrayNot installedPaper tray is not installed. Install the paper tray.Replace the 2nd cassettefeeder with the onecompatible with this model.An incompatible 2nd cassettefeeder is installed.Option feederIncompatibleRemove the printed mediafrom the output tray.Output tray is full.Output TrayFullOverrun Check on the Page Protectioncheck box in the Setup tab.Overrun errorInstall the oil supply roll.Oil supply roll is not installed.Oil RollNot installedReplace the oil supply rollnow.Oil supply roll is worn out.Oil RollWorn out