Panasonic KX-PRL260B Service Manual

Also see for KX-PRD260B: Service manual

Contents

61KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA2012.5.1.2. HandsetFirst, operate the PC setting according to The Setting Method of JIG (P.51).Then download the appropriate data according to the following procedures.Note:(*2) XXX_YYY: revision number"XXX_YYY" vary depending on the country version. You can find them in the batch file, PNZZ- mentioned in The SettingMethod of JIG (P.51).Items How to download/Required adjustmentEEPROM (IC3) Adjusted parameter data is stored in memory.(country version batch file, default batch file,etc.)1) Default batch file: Execute the command “default.bat”.2) Default batch file (remaining): Execute the command“PRLA20US_DEF_RevXXX_YYY.bat”. (*2)3) Country version batch file: Execute the command“PRLA20US_US_RevXXX_YYY.bat”. (*2)4) Clock adjustment5) 2.35 V setting and battery low detectionX'tal (X1) System clock 1) Apply 2.6 V between BATT+ and BATT- with DC power.2) Input Command "sendchar sfr", then you can confirm thecurrent value.3) Check X'tal Frequency.(10.368 MHz ± 100 Hz).4) If the frequency is not 10.368 MHz ± 100 Hz, adjust the fre-quency of CLK executing the command "sendchar sfr xx xx(where xx is the value)" so that the reading of the frequencycounter is 13.824000 MHz ± 5 Hz.