Panasonic KX-PRL260B Service Manual

Also see for KX-PRD260B: Service manual

Contents

8KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA204 Technical Descriptions4.1. US-DECT DescriptionThe frequency range of 1.92 GHz-1.93 GHz is used. Transmitting and receiving carrier between base unit and handset is samefrequency. Refer to Frequency Table (P.62).4.1.1. TDD Frame Format4.1.2. TDMA systemThis system is the cycles of 10 ms, and has 6 duplex paths, but maximum duplex communication path is 5 because of dummybearer use.In 1 slot 417 s, the 10 ms of voice data is transmitted.• 2 - Handsets LinkTraffic BearerA link is established between base unit and handset.The state where duplex communication is performed.Handset doesn't make up duplex in no free RF channels because of interference. (*1)Dummy BearerBase unit sends Dummy-data to the all stand-by state handsets.Handsets receive that data for synchronization and monitoring request from the base unit.Base unit doesn't send Dummy bearer in no free RF channels because of interference. (*1)Note:(*1) It is a feature under FCC 15 regulation and for interference avoidance.In the case of checking RF parts, it is better in least interference condition.417 μs (available) 417 μs (blind)5 ms 5 msUp Link ( Handset -> Base Unit ) Down Link ( Base Unit -> Handset )DATA rate : 1.152 MbpsRX1 RX2 RX3 RX4 RX5 RX6 TX1 TX2 TX3 TX4 TX5 TX6RX1 RX2 RX3 RX4 RX5 RX6 TX1 TX2 TX3 TX4 TX5 TX6TX RXRXTXTraffic Bearer Dummy bearerBase unitHandset 1(Stand by)Handset 2(Link)Handset 3(Link)