Panasonic KX-PRW110FX Operating Instructions Manual

Panasonic KX-PRW110FX Operating Instructions Manual Manual pdf 37 page image

Setting up SMSSMS allows you to send and receive textmessages.Important:R To use SMS features, you must:– subscribe to a Caller ID and/or anappropriate service such as SMS.– confirm that SMS is turned on.– confirm that the correct message centrenumbers are stored.Contact your service provider/telephonecompany for details and availability.Note:R A total of 22 messages (at 160 characters/message) can be saved. Total number maybe more than 22 if length of messages isless than 160 characters/message.R If the unit is connected to a PBX system,you may not be able to use SMS features.Turning SMS on/off1 MMenuN (right soft key) #3572 MbN: Select the desired setting. a MOKNa M NStoring SMS message centrenumbersSMS message centre numbers must bestored in order to send and receive SMSmessages.For Czech:The message centre numbers (used for SMSservices provided by Telefonica O2) arepreprogrammed in this unit. You can changethem if necessary.For Slovakia:The message centre numbers (used for SMSservice provided by Slovak Telecom - T-Com)are preprogrammed in this unit. You canchange them if necessary.R Contact your service provider/telephonecompany for more information.R If you change the unit’s region setting/resetthe base unit, the stored message centrenumbers will be deleted or changed(page 22). In this case, store the numbersagain if necessary.1 To store “Message Centre1”:MMenuN (right soft key) #351To store “Message Centre2”:MMenuN (right soft key) #3522 Edit the number as necessary. a MOKNa M NNote:R For PBX users:– You need to add the PBX line accessnumber and a dialling pause to thebeginning of the Message Centre 1number.– If you only use the Message Centre 1number for SMS, store the MessageCentre 1 number as is (without adding aline access number or dialling pause) toMessage Centre 2.Sending a messageWriting and sending a newmessage1 MMenuN (right soft key) a a MOKN2 MbN: “Create” a MOKN3 Enter a message. a MOKNR You can change the character entrymode by pressing MR/ECON(page 43).4 Enter the destination phone number (20digits max.). a MOKN 2 timesR You can also set the phone number:– from the redial list by pressing MTN.– from the caller list by pressing M N.– from the phonebook by pressingMWN.5 To save the message, select “Yes”. aMOKN6 To send the message, press MOKN.Note:R This unit supports SMS messages of up to612 characters, however, the maximumnumber of characters you can send or37SMS (Short Message Service)PRW110FX(en)_0724_ver012.pdf 37 2013/07/24 13:40:27