Panasonic KX-PRW120 Operating Instructions Manual

Also see for KX-PRW120: Guide Setup guide Setup guide

Contents

Panasonic KX-PRW120 Operating Instructions Manual Manual pdf 28 page image

n Weekly:MbN: Select the desired day of the weekand press MSelectN. a MOKN5 Set the desired time.6 *: Select “AM” or “PM”. a MOKN7 Enter a text memo (30 characters max.).a MOKN8 MbN: Select the desired alarm tone. aMSelectNR We recommend selecting a differentringer tone from the one used foroutside calls.9 MbN: Select the desired snooze setting.a MSelectN10 MSelectN a MOFFNNote:R Press MStopN to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key or MSnoozeN to stop thesound but keep the snooze functionactivated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Silent modeSilent mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Silent mode canbe set for each handset.Using the phonebook’s group feature(page 18), you can also select groups ofcallers whose calls override silent mode andring the handset (Caller ID subscribers only).Important:R Make sure the unit’s date and time settingis correct (page 12).R If you have set the alarm, the alarm soundseven if the silent mode is turned on.Turning silent mode on/off1 MMenuN (right soft key) #2382 MbN: Select the desired setting. a MSaveNR If you select “Off”, press MOFFN toexit.3 Enter the desired hour and minute youwish to start this feature.4 *: Select “AM” or “PM”. a MOKN5 Enter the desired hour and minute youwish to end this feature.6 *: Select “AM” or “PM”.7 MSaveN a MOFFNChanging the start and end time1 MMenuN (right soft key) #2372 Continue from step 3, “Turning silentmode on/off”, page 28.Selecting groups to bypass silentmode1 MMenuN (right soft key) #2412 Select your desired groups by pressing1 to 9.R “ ” is displayed next to the selectedgroup numbers.R To cancel a selected group, press thesame dial key again. “ ” disappears.3 MSaveN a MOFFNCall blockThis feature allows the unit to reject calls when:– the unit receives a call from a phonenumber stored in the call block list asunwanted (“Storing unwanted callers”,page 29).– the unit receives a call without phonenumber (“Blocking incoming calls withoutphone number”, page 29).When a call is received, the unit rings for ashort time*1 while the caller is being identified.If the phone number matches an entry in thecall block list, the unit emits no sound to the28 For assistance, please visit http://www.panasonic.com/helpProgramming