Panasonic KX-PRW120 Operating Instructions Manual

Also see for KX-PRW120: Guide Setup guide Setup guide

Contents

Panasonic KX-PRW120 Operating Instructions Manual Manual pdf 43 page image

performing this procedure, and thenchange it back when finished.3 MbN: Select your wireless router’s SSID.a MSelectN4 Confirm the SSID and then press MOKN.5 Enter the password required to accessthe wireless network. a MOKNR After the base unit connects to thewireless router, “Connected to” andyour wireless router’s SSID isdisplayed.6 MOFFNSimplified configuration (WPS,DHCP)This procedure requires a wireless router thatsupports WPS. If your wireless router supportsWPS, make sure the feature is turned on, andlocate its WPS button before beginning thisprocedure. The WPS button is typicallylabeled “WPS” or has two curved arrows on it.1 MMenuN (right soft key) #5232 MbN: “WPS (Easy setting)” aMSelectN3 Press the WPS button on your wirelessrouter and then press MOKN on thehandset.R The base unit searches for yourwireless router and “Searching...”is displayed.R After the wireless router is found, thebase unit’s Wi-Fi settings will becompleted automatically. When thesetup is complete, “Connected to”and your wireless router’s SSID isdisplayed.4 MOFFNAdvanced configuration (static IPsettings)After using the procedure explained in “Typicalconfiguration (DHCP)”, page 42 or “Simplifiedconfiguration (WPS, DHCP)”, page 43, usethe procedure below to set the base unit’s IPsettings manually if necessary.This procedure is not necessary for mostusers.1 MMenuN (right soft key) #5002 MbN: “Manual (Static)” a MSelectN3 MbN: Select the desired item. a MSelectN4 Enter the desired setting. a MOKNR Press MFEN to move the cursor ifnecessary.5 Set the other items as necessary.6 MbN: “” a MSelectN a MOFFNSmartphone Connect appOnce you have configured the base unit’sWi-Fi and network settings, you are ready todownload the Smartphone Connect app.Download information is available at the webpage listed below.www.panasonic.net/pcc/support/tel/airFor information about using the app, refer tothe Smartphone Connect App Guide, which isavailable for download at the web page listedabove.Other network featuresWi-Fi repeater modeYou can increase the signal range of yourwireless network by turning on the base unit’sWi-Fi repeater mode feature.1 MMenuN (right soft key) #5382 MbN: Select the desired setting. a MSaveNImportant:R If using Wi-Fi repeater mode, do not placethe base unit and your wireless router tooclose to each other. If they are too close,For assistance, please visit http://www.panasonic.com/help 43Smartphone Integration