18Using Hand Scanner1 Pull out the Hand scanner,and then turn over it.2 Choose the desired resolution byResolution switch.l Resolution types(Letter: For documents of letters)(Photo: For documents containingphotographs, etc.)3 Choose the desired Scanning widthby Scanning width switch.l Scanning width types(Within 208mm)(Within 252mm)4 Place the scanning position and the(document left side) on thedocument.5 Pressl You will hear a beep, and the operationindicator will light green after about 1 or 2seconds. You can start scanning after theoperation indicator lights green.Scanning a document 6 Press the hand scanner against thedocument,and move it slowly towards the directionof the arrow ( ).l When it is scanning properly, the operationindicator will flash green.l Scanning speed for different resolution types,see “Operation indicator and warning beep”of the next page.7 After scanning the document, press .8 Insert the hand scanner in the Main unit.Scanner Memory capacityResolutionswitchLetterPhotoScanningSpeed50mm/1 sec100mm/1 secCapacityApprx. 10 pages(document paper size-A4,700 letters)Apprx. 20 pages(document paper size-A4,700 letters)Apprx. 1 pages(document paper size-A4,photo)Operation indicatorResolutionWidth(Document left side)Scanning PositionScanning directionBottom sideThe scanned page number is displayed.