19Operation indicator and warning beepWhen scanning documents, check the operation indicator light.OperationIndicatorGreen lightSlow flashGreen lightFast flashRed lightONRed lightONLight OFFLight OFFWarning BeepNo beepNo beepGreen lightON No beepNo beep1 beep3 beepNo beepSituation RemedyThe document is being scanned properly.(Small size letter mode)To start scanning again,press .Move it more slowly.Move it more slowly.Delete the contents memorizedin the scanner (see 22 page).Scan the document as 2 pages ormore.The document is being scanned properly.(Normal size letter mode)The hand scanner is temporarily stopped duringscanning.You did not move the hand scanner for more than30 seconds, so it has stopped scanningautomatically.The hand scanner is being moved quickly.(The document is being scanned.)The hand scanner is being moved too quickly.(Some parts of the document may not be scanned,or the scanned contents may be too compressed.)The scanner memory is full.(Memory indicator green light will flash fast.)You have scanned a document that is more than1.5m in length as 1 page.The scanner is not operated.Memory indicatorShows the amount of scanner memory being used.Memory indicator(green light)OFFONFlash slowFlash fastMemory used0%66%99%100%