System Programming 4-674.2 System Programming [520]-[522]Assigns the length of time the system holds an incoming outside call via the UCD featurewhen all extensions in the UCD group are busy. When the programmed time expires, thecall will be intercepted or disconnected according to program [523] “UCD Busy Mode”.* Waiting time: 1 through 32 (minutes) / 1 through 59 (seconds)Default 10 minutes• Feature ReferenceSection 3, FeaturesUniform Call Distribution (UCD)[521] UCD Busy Waiting Time* 1Assigns one extension group which works as the UCD group.Default Extension group number 1• Feature ReferenceSection 3, FeaturesUniform Call Distribution (UCD)(1···8)[520] UCD Group* 125 NEXT0 STORE ENDextension group no.++Assigns interval time between sending UCD outgoing messages to an incoming outside callvia the UCD feature when all extensions in the UCD group are busy. The UCD outgoingmessage is repeated during the time programmed in [521] “UCD Busy Waiting Time”.Default 1 minute• Feature ReferenceSection 3, FeaturesUniform Call Distribution (UCD)[522] UCD OGM Message Interval Time*125 NEXT2 STORE ENDSELECT(30 sec/1/1.5/2 min)+*1: Required only when the optional OGM/FAX DetectionCard is installed.25 NEXT1 STORE END(min/sec)waiting time* SELECT
