Features 3-413 Features OAllows the extension assigned as an operator or manager to record up to 2 outgoing voicemessages (maximum 30 seconds each). This message is played when a caller accesses theDISA or UCD feature. An optional OGM/FAX Detection Card is required to program theOGM.The following are some examples of OGM and flow chart.Case 1: Receives 2 calls at a time – OGM for DISA.(Do not want customers to be kept waiting.)OGM1: “This is A company. For the sales division, press 1. For the servicedivision, press 2. To call the operator, press 0.”OGM2: Same as OGM 1Required Settings: [502] “MODE1”[414]-[416] “DISA1”Case 2: Uses the OGM in the day, night and lunch modes – OGM for DISA.OGM1: “This is A company. For the sales division, press 1. For the servicedivision, press 2. To call the operator, press 0.”OGM2: “We are sorry but our office is closed for the day.”Required Settings: [502] “MODE2”[414]-[416] “DISA1” for OGM1, “DISA2” for OGM2Case 3: Uses a different OGM for outside (CO) lines – OGM for DISA.Outgoing Message (OGM)DISA withOGMOutside Call To the designated destinationOGM1SystemDISA withOGMOutside Call To the designated destinationOGM2DISA withOGMOutside Call To the designated destinationOGM1SystemThe call is disconnected by assigning“Disconnect” for DISA2 in program[510] “DISA No Dial Mode”.(In the day mode)DISA withOGMOutside Call OGM2System(In the night mode)(Outside line 1)(Outside line 2)DISA withOGMOutside Call To the designated destinationOGM1SystemDISA withOGMOutside Call To the designated destinationOGM2
