Phone Book20You can store up to 10 names and phone numbers in the phone book.Using the phone book, you can make a call by selecting a name on thehandset display.Storing Names and NumbersMake sure the unit is in the standby mode.1 Press [AUTO/PROGRAM].2 Press a memory station number ([0] to [9]).≥If an item is already stored, that information isdisplayed.3 Press [EDIT].4 Enter a name, up to 15 characters, usingthe dialing buttons ([1] to [9]), or .≥See the steps for entering names and symbols(p. 21).≥If a name is not required, press [EDIT] and goto step 6.5 Press [EDIT].6 Enter a phone number, up to 24 digits.≥Each time you press [MUTE/CLEAR], the digitis erased from the right. To erase all of thedigits, press and hold [MUTE/CLEAR].≥To show the cursor, press after entering adigit. Each time you press [MUTE/CLEAR],the digit under the cursor is erased.≥When you store the last number dialed, press[PAUSE/REDIAL] instead of entering a phonenumber.7 Press [EDIT] to save.≥A beep sounds.≥The handset will return to the standby mode.≥If a pause is required for dialing, [PAUSE/REDIAL] can be stored in a phonenumber counting as one digit (p. 26) in step 6.≥You can exit the programming mode at any time by pressing [OFF].≥If you do not press any buttons for 60 seconds, the unit will return to the standbymode.[ ][ ][ ]EMPTYENTER NAME :TOMENTER NUMBER :SELECT STATION#TOMTOM