Panasonic KX-TCD200G Operating Instructions Manual

Handset Settings18sleeping. Night mode can be set independentlyfor the handset and the base unit (Seite 22).Using the phonebook’s category feature (Seite13), you can also select categories of callerswhose calls will override night mode and ring thehandset (Caller ID subscribers only).Set the date and time beforehand (Seite 9).Setting the start and end time for night mode1 Press {j/OK}.2 Select “Mobilteileinst.”, then press{>}.3 Select “Ruftoneinstell.”, then press{>}.4 Select “Nachtmodus”, then press {>}.5 Select “Start/Ende”, then press {>}.6 Enter the desired hour and minute you wishto start this feature by selecting 2 digits foreach.L If you use 12-hour time entry, select “AM”or “PM” by pressing {*} repeatedlybefore entering the time.7 Enter the desired hour and minute you wishto end this feature by selecting 2 digits foreach.L If you use 12-hour time entry, select “AM”or “PM” by pressing {*} repeatedlybefore entering the time.8 Press {j/OK}.9 Press {ih}.Turning night mode on/off1 Press {j/OK}.2 Select “Mobilteileinst.”, then press{>}.3 Select “Ruftoneinstell.”, then press{>}.4 Select “Nachtmodus”, then press {>}.5 Select “Ein/Aus”, then press {>}.6 Select “Ein” or “Aus”, then press {>}.7 Press {ih}.Hinweis:L When the night mode is turned on, “[N]” isdisplayed.Setting the ring delay for night modeThis setting allows the handset to ring duringnight mode if the caller waits long enough. Afterthe selected amount of time passes, the handsetwill ring, useful when someone urgently needs tospeak with you. If you select “KeinRufsignal”, the handset will not ring duringnight mode.1 Press {j/OK}.2 Select “Mobilteileinst.”, then press{>}.3 Select “Ruftoneinstell.”, then press{>}.4 Select “Nachtmodus”, then press {>}.5 Select “Rufverzögerung”, then press{>}.6 Select the desired setting, then press {>}.7 Press {ih}.Selecting categories to bypass night mode1 Press {j/OK}.2 Select “Mobilteileinst.”, then press{>}.3 Select “Ruftoneinstell.”, then press{>}.4 Select “Nachtmodus”, then press {>}.5 Select “Kateg. Auswähl.”, then press{>}.6 Press the desired category numbers, thenpress {j/OK}.L The selected category number will flash.L To cancel a selected category number,press the number again. The number willstop flashing.7 Press {ih}.Hinweis:L If a call is received from one of the categoriesset to bypass night mode, only the handset willring.TCD200G(e-g).book Page 18 Tuesday, February 8, 2005 8:57 AM