Panasonic KX-TCD705E Operating Instructions Manual

Contents

30678_KX-TCD705G_a_English 8/5/01 6:58 am Page 63Important Information2Do not connect the AC adaptor to anyAC outlet other than the standard AC220–240V, 50Hz.• Output voltage DC 9V, 500 mA.• The apparatus is approved for use withthe PQLV1E power supply.• CAUTION: Do not remove cover. Liveparts inside.Ringer Equivalence Number (REN):This relates to the performance of theapparatus when used in combination withother items of apparatus. It enables thecalculation of the maximum number ofitems of apparatus that may be connectedsimultaneously to the line by summing theREN values of each item.A maximum REN value of 4 should notbe exceeded. The REN value of thisapparatus is 1.WARNING:The apparatus may be unable to makeemergency 999 or 112 telephone calls,under certain conditions:-• The portable handset battery needsrecharging, or has failed.• During a mains power failure.• When the Key Lock is set to ON.• When the Unit is in Direct Call Mode.NOTE:If you experience any problems with thenormal use of your apparatus, you shouldunplug it from the telephone outlet andconnect a known working telephone in itsplace. If the known working telephone stillgives problems, then please contact thecustomer service department of yourPSTN operator. If it operates properly,then the problem is likely to be a fault inyour apparatus. In this case, contact yoursupplier for advice. Your PSTN operatormay charge you if they attend a servicecall that is not due to apparatus suppliedby them.Dear purchaser,You have acquired a KX-TCD705E, which is a product made in regard withthe European Standards for Cordless Telephones (DECT). DECT technologyis characterised by high-security protection against interceptions as well ashigh-quality digital transmission.This telephone was designed for a wide range of applications.For example, this telephone can be used within a network of base units andhandsets, constituting a telephone system which:• operates up to 6 handsets at one base unit• allows an intercom between handsets• allows the operation of a handset at up to 4 base units, expanding thecommunication radio area.This telephone may be used for:• operating several handsets• operating at several base units• connecting the base unit to a PBX.