Panasonic KX-TCD961CXB Operating Instructions Manual

Contents

Panasonic KX-TCD961CXB Operating Instructions Manual Manual pdf 29 page image

Cordless Telephone (Advanced Operations)Chapter 31 Press then .2 Press .3 Enter the current base unit password.• The factory preset is 0000.4 Enter the new 4-digit password TWICE.• A confirmation tone sounds and thedisplay will return to the stand-by mode.5INT29You can program a 4-digit password for both the handset and base unit individually. Each factorypreset is 0000. Changing the password may prevent the unauthorized use of your unit by anotherperson.On the base unitYou need to enter the password when using thefunctions such as “Setting the dialing mode”(p. 13), “Setting the pause timing” (p. 26),“Setting the call restriction” (p. 32), “Storing thecarrier code/area code” (p. 35), “Clearing thesettings of the base unit memory” (p. 37),“Registering a handset in the base unit” (p. 48),“Canceling a handset” (p. 50) and “Setting thebell selection” (p. 51).Once you have programmed the password, you cannot confirm it. We recommend you write downthe password. If you forget it, please consult your nearest Panasonic Service Center.• If 5 beeps sound in step 3, the enteredpassword is incorrect. Enter the correctpassword.Setting the PasswordOn the handsetYou need to enter the password when using thefunctions, such as “Setting the call prohibition”(p. 31), “Clearing the settings in handsetmemory” (p. 37) and “Canceling a base unit”(p. 50).1 Press .2 Press G or F until “F5 ” is displayed,then press .3 Enter the current handset password.• The factory preset is 0000.4 Enter the new 4-digit password TWICE.• If you misdial, press . Digits areerased from the right.• A confirmation tone sounds and thedisplay will return to the stand-by mode.COKF5o - - - -F5o - - - - o - - - -5o - - - -5o - - - - o - - - -KX-TCD961CXB(28~33) 99.12.3 2:15 PM Page 29