Panasonic KX-TCD961CXB Operating Instructions Manual

Contents

Panasonic KX-TCD961CXB Operating Instructions Manual Manual pdf 51 page image

Multi-Unit User Operations Chapter 551Selecting the Stand-by Mode DisplayBell Selection1 Press then .2 Press .3 Enter the base unit password (p. 29).• The current setting is displayed.1: All handsets2: Specified handset(s)3: First handset1INT 4 Press .• The current registered handset number(s)is/are displayed.5 Enter the handset number(s) you want toring.• The selected handset number(s) flash(es).• If you misdial, press the number(s) again.6 Press .• A confirmation tone sounds and thedisplay will return to the stand-by mode.2There are three choices for bell selection. When a call is being received:— all handsets ring. “All handsets”— the selected handset(s) ring(s). “Specified handset(s)”— the selected handset rings first, then if it does not answer, all other handsets will ring. “First handset”The factory preset is “All handsets”. To change the bell selection, program as follows.Selecting specified handset(s)You can choose which handset(s) you want to ring.You can choose whether to display the currently connected base unit number, handset number or nodisplay while in the stand-by mode. The factory preset is the base unit number.1 Press .2 Press G or F until “F3 i ” is displayed,then press .• The current setting is displayed.1: Base unit number2: Handset number 0: No displayOK3 Press G or F to select the desiredsetting.• You can also press , or toselect the setting.4 Press .• A confirmation tone sounds and thedisplay will return to the stand-by mode.021F3 i0 iiu iEx. All handsets is selected.iu2 - i23456Ex. Handset number is selected.Ex. Handset 1, 2, 3, 4, 5 and 6 are registered.[ 2 ]KX-TCD961CXB(47~56) 99.12.3 2:20 PM Page 51