3.00 Basic Operation3.01 Starting Local ModeTo enter the Local Mode, set the LOCAL switch(on the right side of the Attendant Console) to“ON” when call processing mode of the attendantconsole is displayed, then the Local Mode MainMenu is displayed on the screen. (See theillustration below)The prompt “$” is displayed on this screen andyou can enter commands.3.02 Ending Local ModeTo leave the Local Mode, set the LOCAL switch(on the right side of the Attendant Console) to“OFF” when prompt “$” is displayed on thescreen, then call processing mode of attendantconsole is obtained automatically.3.03 Command EntryThe Local Mode comands can be entered eitherby simply pressing the associated function key orentering each command character at Fullkeyboard.To execute a command line, press the RETURNkey after entering a command.14-A-3******************************************* ** ** *******************************************Local mode for attendant consoleDIG : enter the diagnostic mode of attendant consoleHELP : display the command information(1) (2) (3) (4) (5) (6) (7) (8)DIG (Cr) HELP ( Cr)$Function field: display the commands to be selected by keys. W2@@6Xhe.MeI/X?h?V/KeO.fV4@@0YfW2@@6Xhe.MeI/X?h?V/KeO.fV4@@0YfW2@@6Xh.MeI/X?g?V/KeO.eV4@@0YeW2@@6Xh.MeI/X?g?V/KeO.eV4@@0YeCommand lineLocal Mode Main Menu Screen
