Customising Your Phone & System230 User Manual4.3 Customising Your System (UserProgramming)You can customise your system according to your application.Your system already has default settings (factory installed). Most of the programming is done by yourdealer. Consult your dealer about system applications and re-programming according to your needs.If you would like to assign/change the following features, extensions which meet certain conditionscan re-programme them at any time by entering the User Programming mode.*The available programming items are shown below. (Programme number)• 4.3.1 Date and Time Set (000)• 4.3.2 System Speed Dialling Number Set (001)• 4.3.3 System Speed Dialling Name Set (002)• 4.3.4 Extension Name Set (004)• 4.3.5 Flexible CO Button Assignment (005)• 4.3.6 Caller ID Dial Set (006)• 4.3.7 Caller ID Name Set (007)• 4.3.8 Absent Messages Set (008)• 4.3.9 Quick Dial Number Set (009)• 4.3.10 DISA/TIE User Code Set (010)Required TelephoneA Panasonic Proprietary Telephone with display (e.g., KX-T7433, KX-T7436)User PasswordTo enter the programming mode, a user password (4-7digits) is required. It should be programmedby System Programming beforehand. Check pre-programmed password (Default: 1234).ConditionsOnly one extension, which is on-hook and holding no calls, is available for performing userprogramming at one time. If another extension is programming, "Another Use" is displayed.ListBefore programming, decide your selections and write them down in the list for each programmingitem. These are useful for easy programming and future reference.* The PROGRAM button is used to enter/exit the User Programming mode. If the PROGRAMbutton is not provided on your PT, please use the PAUSE button instead of the PROGRAMbutton.
