Panasonic KX-TDA0155 Quick Installation Manual

Also see for KX-TDA0155: Quick installation guide

12345678D1CD2CD1BD2AD2BD1DD2DD1ACS 1 (RJ45)DLC8 card (RJ11)Pin No.Signal NameMaster12345678D1CD2CD1BD2AD2BD1DD2DD1ACS 2 (RJ45)Pin No.Signal NameMaster112341234D1D2D1D2D1D21234D1D21234234Signal Name Pin No.Port No.51234D1D2:::Accessories and User-supplied Items for the CSAccessories (included): Screws ´ 2, Washers ´ 2User-supplied (not included): RJ45 connectorNote• The no. 4 and no. 5 pins (Master) of the CS must be connected to a pair of pins on the Super HybridPorts or DLC4/DLC8 card. Then use 4 consecutive pairs of pins on the Super Hybrid Ports orDLC4/DLC8 card, starting with the pins corresponding to the Master, as in the example above.• When connecting multiple KX-TDA0158 CSs to a DLC8 card, make sure that the no. 4 and no. 5pins (Master) of adjacent CSs are at least 3 pairs of pins away on the card.• For details about the Super Hybrid Ports or DLC4/DLC8 card, refer to the Installation Manual foryour PBX.• CS connections must be made within the Super Hybrid Ports or the same DLC4/DLC8 card.• When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed.Check the connection of CS and the PBX using the Maintenance Console. For information abouthow to view CS information using the Maintenance Console, refer to "Utility—CS Information" inthe PC Programming Manual or the On-line Help for your PBX.Quick Installation Guide 357 Connecting a Cell Station to the PBX