1.29.2 Confirmation ToneDescriptionAt the end of feature operations, the PBX confirms the success of the operation by sending a confirmation toneto extension users.Type DescriptionTone 1 a. Sent when the setting is accepted.b. Sent when a call is received in voice-calling mode(Alternate Receiving—Ring/Voice). The caller’svoice will be heard after the tone.Tone 2 a. Sent from an external paging device or an extensionbefore being paged.b. Sent when a call is received in Hands-freeAnswerback mode.Tone 3-1 a. Sent before a conversation is established whenusing the Paging feature.b. Sent when a conversation is established with theextension in the following modes after the callmaking operation:• Hands-free Answerback mode• Voice-calling mode (Alternate Receiving—Ring/Voice)c. Sent when making a call to or from a doorphone.Tone 3-2 Sent just before a conversation is established whenaccessing the following features by the feature numbers:• Call Park Retrieve• Call Pickup• Hold Retrieve• Paging Answer• TAFASTone 4-1 Sent when moving from a two-party call to a three-partycall. (e.g., Executive Busy Override, Conference,Privacy Release, Two-way Record.)Tone 4-2 Sent when moving from a three-party call to a two-partycall. (e.g., Executive Busy Override, Conference,Privacy Release, Two-way Record.)Tone 5 Sent when a call is placed on hold (includingConsultation Hold).Conditions• Confirmation Tone PatternsAll confirmation tone patterns have a default (® 3.2.1 Tones/Ring Tones).• It is possible to eliminate each tone.Feature Guide 3091.29.2 Confirmation Tone
