Leaving Voice MessagesIf the extension user you called is not able to answer your call, and your call is redirected to the message box,you will hear the greeting message. Then, you can leave a voice message for that extension. It is also possibleto leave a voice message directly in the message box of a desired extension by following the steps below:To leave a voice message directly to another extension’s message boxPT/SLT/PSOff-hook. Enter 38. Enter #6.83C.Tone6#Dial extension number.extension no.You hear thegreeting message.Recordmessage.ORdial keyOn-hook or press anydial key (0–9, , #).• Voice message recording will stop, you will hear a notification tone, and the call will bedisconnected, in the following cases:a. the recording time for the voice message reaches the preprogrammed limit. (default: 120seconds)b. the recording space for the SVM card reaches the limit.• When you are on the phone, you can transfer the call directly to the message box of a desiredextension by placing the call on hold temporarily, then pressing 38 + #6 + the desiredextension number. This allows the caller to leave a voice message in the message box of thedesired extension.User Manual 1051.6.2 Using Voice Messaging (Built-in Simplified Voice Message [SVM])
