3.3 Customising Your System (System Programming)190 User Manual3.3 Customising Your System (SystemProgramming)3.3.1 Programming InformationYou can customise your system according to your requirements.[Your system already has default settings (factory installed).]The programming is shown below. (Programme number)• The date and time [000]• System speed dialling numbers and names [001]/[002]• Extension number and name [003]/[004]Available ExtensionThe extension allowed through COS programmingRequired TelephoneA Panasonic Proprietary Telephone with display (over 2 lines)(e.g., KX-T7636)System PasswordTo enter programming mode, the system password (max. 10 digits) is required. (Default: 1234)WARNING• The PBX has a default password preset. For security, change the password the first time that youprogramme the PBX.• It is strongly recommended that a password of 10 numbers or characters be used for maximumprotection against unauthorised access. For a list of numbers and characters that can be used inthe password, refer to "Entering Characters".• To avoid unauthorised access to the PBX, keep the password secret. If it becomes known to others,the PBX may be misused.• Change the password periodically.ConditionsThe programming extension must be idle, on-hook and holding no calls.ListBefore programming, decide the settings and write them down. Your notes will provide a useful record of theprogramming for future reference. Your dealer also has programming records which contain all of the systemprogramming. You may ask for photocopies of these tables to be aware of the facilities and featuresavailable.
