2.8 Connection of 2.4 GHz Portable StationsInstallation Manual 1432.8 Connection of 2.4 GHz Portable Stations2.8.1 OverviewThe following equipment is required to connect the wireless system:CS: Cell Station (KX-TDA0141)This unit determines the area covered by the wireless system. Up to 2 calls can be made at the same timethrough each CS.PS: 2.4 GHz Portable Station (KX-TD7680/KX-TD7690)The KX-TDA30 can support up to 28 PSs. For more details about the PS, refer to the PS OperatingInstructions.CAUTION• The CS should be kept free of dust, moisture, high temperature (more than 40 ), low temperature(less than 0 ), and vibration, and should not be exposed to direct sunlight.• The CS should not be placed outdoors (use indoors).• The CS should not be placed near high-voltage equipment.• The CS should not be placed on a metal object.• Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere with the KX-TDA wireless system. Examples of such systems are cordless telephones, wireless LAN, HomeRF, microwave ovens and other ISM devices. These systems may cause minor noise.• Keeping some distance between the equipment listed below may prevent interference. (Thedistance may vary depending on the environment.)Equipment DistanceCS and office equipment such as a computer, telex, faxmachine, etc.More than 2 mCS and PS More than 1 mEach PS More than 0.5 mHybrid IP-PBX and CS More than 2 mCS and CS More than 15 mPlease take into consideration the distance between the CSs when site planning. Please consulta certified dealer for details.However, the required distance between CSs may vary depending on the environment of theinstallation site and conditions in which the wireless system is used. Conduct the site survey todetermine the appropriate distance.˚C˚C
